What sort of flat is thought to be a corner apartment?

A corner apartment can be found in the end of the construction: this is, part of its walls aren’t adjacent to the neighbors, however are the outer walls of the house.

There might be one apartment at a corner apartment – it occupies the whole end of the house, it’s also known as a corner apartment. Or 2 – that the windows of a forget the street, the next – the lawn. Is based on the building plan, the layout of the assumptions.

There’s also a”different caste” – housing with walls from the expansion joints. These”gaps” between entrances are usually made in multi-story buildings, the principal undertaking of the unit – to break the deformation forces throughout the shrinkage of the building, in the event of emergencies. Pros and cons of corner flats in the joint are slightly different from the conventional ones using this street – we’ll pay particular attention to this subject in the previous section.

Temperature

Since the 2-3 sides of the space is domikday.ru outdoors, in winter it’s 3-5C colder, and in summertime on the opposite – hotter. Especially if the conclusion of the home is heated by the sun. Sometimes, the gap reaches 10C – but such a distinction is unacceptable, suggests a problem with the outside of the house – most likely have to get hold of the management firm, asking (or forcing) to fulfill their immediate duties, to patch the cracks shaped.

Corner apartment in a brick house with thick walls is more comfy. Such risks aren’t exposed – the depth of the wall acts as a buffer, not allowing overheating, overcooling.

Humidity

When a room has only one wall united with the street, it usually has sufficient room heat to avoid freezing and warmth. But when there are two outside walls, and they are adjacent – there’s a high probability of freezing at the corner, the creation of condensation inside, and thus – mold, fungus. Their spores not just spoil the overall look of the space, but also lead to the appearance, complication of many serious ailments.

Important! The problems of corner place are justified when the factors are related – overly low temperatures from heating batteries combined with dampness is certain to result in moldy walls.